Tagged: evive Menu
- October 18, 2018 at 10:21 PM #21846
Thanks for your help.
I was not able to run the Arduino code provided – see the attached “steps followed” for error messages and screen video showing the evive screen problem
Please let me know if I did not use your provided Arduino code correctlyOctober 18, 2018 at 10:23 PM #21847
Add – Steps followedOctober 18, 2018 at 10:27 PM #21848
steps followed without videoOctober 20, 2018 at 10:09 AM #21914Pankaj VermaKeymaster
As the code compiled according to your document, there is no problem of code. You can check for a few things to remove this problem:
- Try to connect evive to a different USB hub and upload the program again.
- If the above solution does not work, try to upload LED blinking example onto your evive.
- You can also try to upload the code from another laptop.
Please let me know if the above solution worked?
You must be logged in to reply to this topic.